Can use upto a 98mm RWD Vehicle for Production Class

Must use a 102mm RWD Vehicle for Lemans Class


EQUIPMENT USED:


Stock Motor (MZ9P)(White can)

Boards: MZ413 (Blue wire), MZ414/MZ414B (White wire), Evo Board (MZ601)

   **ASF Boards might get interference


QUALIFYING

BOX STOCK:


ONLY changes that are allowed are wheels, wheel nuts, tires and bodies.


ALL LM, MM & RM Cars are allowed


Must use...

Stock Remote

 6t Pinion 

Stock motor (MZ9P)(WHITE CAN)(No modifications to motor, keep capacitors and thermal cutoffs on).

Stock Boards MZ413 (Blue wire), MZ414 or MZ414B (white wire) (NO EVO BOARDS!)


Bodies: NO Lexan bodies are allowed, can use lexan windows.

             Allowed: Can dermal/File your body for adjustments to allow different offsets

                            3D printed wings are allowed

                            Missing side mirrors, wings, lights, windows, etc are allowed

NO King Pin flips

Do Not paint the Springs


4100KV CLASS:​



I WILL ALLOW DRIVERS WHO ARE LEARNING HOW TO RACE AND ONLY HAVE ONE CAR RACE IN ALL 3 STOCK MOTOR CLASSES. ONCE THEY SART GETTING IN THE A-MAIN THEY WILL BE REQUIRED TO RUN THE PROPER CAR.

We run a 4 minute Main to finish up each class. Drivers who make it in the A-Main will use Store batteries. Before each race the drivers must put in the batteries at the counter and go straight to the track, no pit stops, when the race is over the drivers must go directly to the counter.

EQUIPMENT USED:


Kyosho ball differential (MZW436 MM,RM / MZW308 LM).

Motor: Kyosho 4100kv (MZ606)

Pinion: 10t (Example PN400510)

Bodies: Same rules as Box Stock

​MAIN

The car you qualify with is the car you need to race with.

If your body breaks, you need to notify the race director to be allowed to put on another body.

If your car breaks during a heat and can not be fixed before the main, the driver will be pushed down to the lowest main.

RULES

HEAT

AWARDS

A one minute qualifying with your best lap time will determine your position in the heat.  Example..If we had 15 drivers we would have 3 heats of 5 drivers, if we had 12 drivers we would have 3 heats of 4 drivers.


If you qualified with the worst lap with 15 drivers, you would be in Heat C position 5, if you qualified 8th, you would be in Heat B postion 3.

RACE FORMAT

We have a sticker/token award system. In the A Main you earn a token if you finish in the top 3. We have a first, second and third place tokens. Once you earn 15 first, second or third place tokens in each race you will receive a trophy and your name will be put on a plaque and you will inducted into the R/C Hobby Nook Hall of Fame, located in the Pit area.


Stickers for the top 3 finshes will be handed out in the other Mains.

We run a 3 minute Heat based on laps with best overall time as a tie breaker to determine your placement in the Main. Depending on how you finish in the Heat you can move down or up in the Main. Example.. If you were in Heat C and had 15 laps and another driver in Heat A or B had 14 laps, you would move up either Main A or B depending on how the other drivers finished.

WE SPECIAL ORDER !

WE ACCEPT ACIMA !


PRODUCTION & LEMANS CLASS

                     STORE HOURS

 Monday: Closed

Tuesday - Saturday 11:00am - 7:00pm

            Sunday 12:00pm - 6:00pm

CLASSES


         ADDRESS

150 S Equity Dr. Ste D

Smithfield NC 27577

      (919) 934-5931

LAYAWAYS AVAILABLE !

( Behind Buffalo Wild Wings )